Request a Quote on The Boeing Company Part 9 61961 7 with the NSN 3120-01-560-5957

Part Number: 9 61961 7

Alternate P/N: 9619617

Manufacturer: The Boeing Company

NSN: 3120-01-560-5957

NIIN: 015605957

Item Name : Bushing Sleeve

CAGE Code: 81205

FSC: 3120 Bearings Plain Unmounted

FSG: 31 Bearings

Country : USA

NCB Code : 01

Thank you for taking interest in The Boeing Company part number 9 61961 7, which is listed with the NSN 3120-01-560-5957 and a product description of “Bushing Sleeve.” In order to receive procurement options on this particular listing, we ask that you fill out and submit the form provided below with as much information as you can concerning your needs. By supplying our staff with key details on your desired quantity, pricing target, and expedited fulfillment timeframe, we can respond with a quote that has been specifically tailored to your unique specifications. We also ask that you make us aware of any restrictions that you may have as soon as possible, such as if you have a time constraint or are seeking unlisted items.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Alongside part number 9 61961 7, you are encouraged to continue exploring our collection curated catalogs to find additional items that can accompany this Bushing Sleeve part with the NSN 3120-01-560-5957. For example, you can browse other The Boeing Company components that were produced under CAGE Code 81205 or listings that belong to FSC 3120 Bearings Plain Unmounted with ease on our website, with search tools provided for quick location. Furthermore, our staff is just a call or email away from assisting you with any inquiries or requests, so be sure to get started on the quotation process for part number 9 61961 7 and other desired offerings on Aerospace Spare.

NSN Information for Part Number 9 61961 7 with NSN 3120-01-560-5957, 3120015605957

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-560-5957 Item PartTypeName: BUSHING,SLEEVE	3120	015605957	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
9-61961-7	5	2	3

Characteristics Data of NSN 3120-01-560-5957, 3120015605957

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	1.0800 INCHES NOMINAL
ADAR	BODY OUTSIDE DIAMETER	6.3832 INCHES MINIMUM AND 6.3853 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	5.5600 INCHES NOMINAL
AEPR	FLANGE OUTSIDE DIAMETER	7.2500 INCHES NOMINAL
AGAV	END ITEM IDENTIFICATION	C-135 AIRCRAFT, BUSHING-MAIN LANDING GEAR FWD TRUNNION
AGFF	FLANGE WIDTH	0.1650 INCHES MINIMUM AND 0.1750 INCHES MAXIMUM
BZLX	CORNER SHAPE	CHAMFERED INSIDE LEFT CORNER
BZLX	CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
BZLX	CORNER SHAPE	CHAMFERED OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	ROUND LEFT FLANGE BODY CORNER
BZLX	CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CSYM	SURFACE FINISH	125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
CSYM	SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CSYM	SURFACE FINISH	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
CSYM	SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF BODY
CSYM	SURFACE FINISH	125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
CSYM	SURFACE FINISH	63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	BUSHING AFT 3RD OVER
MATT	MATERIAL	COPPER ALLOY 630 OVERALL OR COPPER ALLOY 954 OVERALL OR COPPER ALLOY 955 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-B-6946 COLD DRAWN MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-B-671 CLASS 3 HT TR FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-B-671 CLASS 4 HT TR FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM LEFT END SURFACE OF BODY AND FLANGE OR ZINC LEFT END SURFACE OF BODY AND FLANGE AND NICKEL LEFT END SURFACE OF BODY AND FLANGE
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY OR ZINC OUTSIDE DIAMETER SURFACE OF BODY AND NICKEL OUTSIDE DIAMETER SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE OR ZINC OUTSIDE DIAMETER SURFACE OF FLANGE AND NICKEL OUTSIDE DIAMETER SURFACE OF FLANGE
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF BODY OR ZINC RIGHT END SURFACE OF BODY AND NICKEL RIGHT END SURFACE OF BODY
SFTT	SURFACE TREATMENT	CADMIUM RIGHT END SURFACE OF LEFT FLANGE OR ZINC RIGHT END SURFACE OF LEFT FLANGE AND NICKEL RIGHT END SURFACE OF LEFT FLANGE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS-QQ-PP-416, TYPE II, CLASS 3 (PREFERRED) ASSN STD SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE OR AMS 2417, TYPE 1 OR TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE OR AMS 2451/4 OR 3 ASSN
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS-QQ-PP-416, TYPE II, CLASS 3 (PREFERRED) ASSN STD SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY OR AMS 2417, TYPE 1 OR TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY OR AMS 2451/4 OR 3 ASSN STD 1S
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS-QQ-PP-416, TYPE II, CLASS 3 (PREFERRED) ASSN STD SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE OR AMS 2417, TYPE 1 OR TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE OR AMS 2451/4 OR 3 ASSN STD SI
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS-QQ-PP-416, TYPE II, CLASS 3 (PREFFERED) ASSN STD SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY OR AMS 2417, TYPE 1 OR TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY OR AMS-2451/4 OR 3 ASSN STD SINGLE TREATMENT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS-QQ-PP-446, TYPE II, CLASS 3 (PREFERRED) ASSN STD SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE OR AMS 2417, TYPE 1 OR TYPE 2 ASSN STD SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE OR AMS 2451/4 OR 3 ASSN ST
STYL	STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END, INTERNAL FLANGE AT BOTH ENDS