Request a Quote on Siemens Demag Delaval Part SG3658PC61 with the NSN 3040-00-585-3653

Part Number: SG3658PC61

Manufacturer: Siemens Demag Delaval

NSN: 3040-00-585-3653

NIIN: 005853653

Item Name : Worm Shaft

CAGE Code: 16712

FSC: 3040 Miscellaneous Power Transmission Equipment

FSG: 30 Mechanical Power Transmission Equipment

Country : USA

NCB Code : 00

Thank you for taking interest in Siemens Demag Delaval part number SG3658PC61, which is listed with the NSN 3040-00-585-3653 and a product description of “Worm Shaft.” In order to receive procurement options on this particular listing, we ask that you fill out and submit the form provided below with as much information as you can concerning your needs. By supplying our staff with key details on your desired quantity, pricing target, and expedited fulfillment timeframe, we can respond with a quote that has been specifically tailored to your unique specifications. We also ask that you make us aware of any restrictions that you may have as soon as possible, such as if you have a time constraint or are seeking unlisted items.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Alongside part number SG3658PC61, you are encouraged to continue exploring our collection curated catalogs to find additional items that can accompany this Worm Shaft part with the NSN 3040-00-585-3653. For example, you can browse other Siemens Demag Delaval components that were produced under CAGE Code 16712 or listings that belong to FSC 3040 Miscellaneous Power Transmission Equipment with ease on our website, with search tools provided for quick location. Furthermore, our staff is just a call or email away from assisting you with any inquiries or requests, so be sure to get started on the quotation process for part number SG3658PC61 and other desired offerings on Aerospace Spare.

NSN Information for Part Number SG3658PC61 with NSN 3040-00-585-3653, 3040005853653

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-585-3653 Item PartTypeName: WORM SHAFT	3040	005853653	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
W65C49	5	9	5

Characteristics Data of NSN 3040-00-585-3653, 3040005853653

MRC	Criteria	Characteristic
AAHN	END SIMILARITY	NOT IDENTICAL
AASA	THREAD LENGTH	0.750 INCHES NOMINAL SECOND END,SEVENTH PORTION
AASA	THREAD LENGTH	1.813 INCHES NOMINAL FIRST END,SECOND PORTION
ABHP	OVERALL LENGTH	27.344 INCHES NOMINAL
ABRR	KEYWAY WIDTH	0.250 INCHES NOMINAL SECOND END,SEVENTH PORTION
ABRV	KEYWAY DEPTH	0.094 INCHES NOMINAL SECOND END,SEVENTH PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	N-12 OR UN-12 FIRST END,SECOND PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	UNS SECOND END,SEVENTH PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND FIRST END,SECOND PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND SECOND END,SEVENTH PORTION
BYFR	TEETH HARDNESS RATING	37.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
CFFB	WORM THREAD QUANTITY	2
CFFC	WORM THREAD LEAD	2.8125 INCHES NOMINAL
CFFD	WORM THREAD DIRECTION	RIGHT-HAND
CFFF	WORM PRESSURE ANGLE IN DEG	27.500
CFFG	WORM HELIX ANGLE	18 DEG 50 MIN
CFFK	WORM OUTSIDE DIAMETER	3.517 INCHES MINIMUM AND 3.519 INCHES MAXIMUM
CFFL	WORM PITCH DIAMETER	2.623 INCHES NOMINAL
CFFM	SHAFT HARDNESS RATING	37.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
CFFN	WORM THREAD SECTION LENGTH	4.750 INCHES NOMINAL
CFFP	WORM BODY LENGTH	4.750 INCHES NOMINAL
CFFQ	WORM BODY TAPERED BEARING SURFACE END	NOT PROVIDED
CFFW	SHAFT LOCATION	BOTH ENDS OF WORM
CFFX	STRAIGHT UNTHREADED LENGTH	0.086 INCHES MINIMUM SECOND END,THIRD PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	0.091 INCHES MAXIMUM SECOND END,THIRD PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	0.250 INCHES NOMINAL SECOND END,FIFTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.125 INCHES NOMINAL SECOND END,SIXTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.274 INCHES MINIMUM SECOND END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.279 INCHES MAXIMUM SECOND END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.375 INCHES NOMINAL FIRST END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.688 INCHES NOMINAL SECOND END,SEVENTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	3.750 INCHES NOMINAL SECOND END,FIRST PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	4.063 INCHES NOMINAL FIRST END,FIRST PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	4.422 INCHES NOMINAL SECOND END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.1240 INCHES MINIMUM SECOND END,SEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.1245 INCHES MAXIMUM SECOND END,SEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.1809 INCHES MINIMUM SECOND END,SIXTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.1812 INCHES MAXIMUM SECOND END,SIXTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.625 INCHES NOMINAL SECOND END,FIFTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.9683 INCHES MINIMUM FIRST END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.9686 INCHES MAXIMUM FIRST END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.051 INCHES MINIMUM SECOND END,THIRD PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.063 INCHES MAXIMUM SECOND END,THIRD PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.155 INCHES MINIMUM SECOND END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.160 INCHES MAXIMUM SECOND END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.1652 INCHES MINIMUM SECOND END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.1656 INCHES MAXIMUM SECOND END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.500 INCHES NOMINAL FIRST END,FIRST PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.500 INCHES NOMINAL SECOND END,FIRST PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.2500 INCHES MINIMUM SECOND END,SEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.2520 INCHES MAXIMUM SECOND END,SEVENTH PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.135 INCHES MINIMUM SECOND END,SEVENTH PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.140 INCHES MAXIMUM SECOND END,SEVENTH PORTION
CFQP	THREADED SECTION PIN HOLE DIAMETER	0.219 INCHES NOMINAL FIRST END,SECOND PORTION
MATT	MATERIAL	STEEL COMP E4340
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000,COND E2 MIL SPEC SINGLE MATERIAL RESPONSE