Request a Quote on Northrop Grumman Systems Corporation Part 905J341-301,336 with the NSN 3040-00-585-3505

Part Number: 905J341-301,336

Alternate P/N: 905J341301336

Manufacturer: Northrop Grumman Systems Corporation

NSN: 3040-00-585-3505

NIIN: 005853505

Item Name : Worm Shaft

CAGE Code: 90099

FSC: 3040 Miscellaneous Power Transmission Equipment

FSG: 30 Mechanical Power Transmission Equipment

Country : USA

NCB Code : 00

Thank you for taking interest in Northrop Grumman Systems Corporation part number 905J341-301,336, which is listed with the NSN 3040-00-585-3505 and a product description of “Worm Shaft.” In order to receive procurement options on this particular listing, we ask that you fill out and submit the form provided below with as much information as you can concerning your needs. By supplying our staff with key details on your desired quantity, pricing target, and expedited fulfillment timeframe, we can respond with a quote that has been specifically tailored to your unique specifications. We also ask that you make us aware of any restrictions that you may have as soon as possible, such as if you have a time constraint or are seeking unlisted items.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

Alongside part number 905J341-301,336, you are encouraged to continue exploring our collection curated catalogs to find additional items that can accompany this Worm Shaft part with the NSN 3040-00-585-3505. For example, you can browse other Northrop Grumman Systems Corporation components that were produced under CAGE Code 90099 or listings that belong to FSC 3040 Miscellaneous Power Transmission Equipment with ease on our website, with search tools provided for quick location. Furthermore, our staff is just a call or email away from assisting you with any inquiries or requests, so be sure to get started on the quotation process for part number 905J341-301,336 and other desired offerings on Aerospace Spare.

NSN Information for Part Number 905J341-301,336 with NSN 3040-00-585-3505, 3040005853505

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3040-00-585-3505 Item PartTypeName: WORM SHAFT	3040	005853505	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
905J341PC301	5	2	5

Characteristics Data of NSN 3040-00-585-3505, 3040005853505

MRC	Criteria	Characteristic
AAHN	END SIMILARITY	NOT IDENTICAL
AASA	THREAD LENGTH	0.688 INCHES NOMINAL EITHER END,EIGHTH PORTION
AASA	THREAD LENGTH	0.688 INCHES NOMINAL EITHER END,THIRD PORTION
ABHP	OVERALL LENGTH	30.125 INCHES NOMINAL
ABRR	KEYWAY WIDTH	0.313 INCHES NOMINAL EITHER END,EIGHTH PORTION
ABRR	KEYWAY WIDTH	0.313 INCHES NOMINAL EITHER END,THIRD PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	SPECIAL EITHER END,EIGHTH PORTION
AJYP	SCREW THREAD SERIES DESIGNATOR	SPECIAL EITHER END,THIRD PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND EITHER END,EIGHTH PORTION
AKAF	SHAFT THREAD DIRECTION	RIGHT-HAND EITHER END,THIRD PORTION
BDGL	DISTANCE FROM RADIAL CENTER TO FLAT SURFACE	1.000 INCHES NOMINAL EITHER END,FIFTH PORTION
BYFR	TEETH HARDNESS RATING	56.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM
CFFB	WORM THREAD QUANTITY	1
CFFC	WORM THREAD LEAD	1.625 INCHES NOMINAL
CFFD	WORM THREAD DIRECTION	RIGHT-HAND
CFFF	WORM PRESSURE ANGLE IN DEG	20.000
CFFG	WORM HELIX ANGLE	7 DEG 42 MIN
CFFK	WORM OUTSIDE DIAMETER	4.862 INCHES NOMINAL
CFFL	WORM PITCH DIAMETER	3.448 INCHES NOMINAL
CFFM	SHAFT HARDNESS RATING	C SCALE 24
CFFN	WORM THREAD SECTION LENGTH	8.000 INCHES NOMINAL
CFFP	WORM BODY LENGTH	8.000 INCHES NOMINAL
CFFQ	WORM BODY TAPERED BEARING SURFACE END	NOT PROVIDED
CFFW	SHAFT LOCATION	BOTH ENDS OF WORM
CFFX	STRAIGHT UNTHREADED LENGTH	0.250 INCHES NOMINAL EITHER END,FOURTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	1.063 INCHES NOMINAL EITHER END,SEVENTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.438 INCHES NOMINAL EITHER END,SIXTH PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.625 INCHES NOMINAL EITHER END,FIRST PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	2.875 INCHES NOMINAL EITHER END,SECOND PORTION
CFFX	STRAIGHT UNTHREADED LENGTH	7.125 INCHES NOMINAL EITHER END,ELEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	0.750 INCHES NOMINAL EITHER END,FIRST PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.001 INCHES MAXIMUM EITHER END,NINTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.874 INCHES MINIMUM EITHER END,ELEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.875 INCHES MAXIMUM EITHER END,ELEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.999 INCHES MINIMUM EITHER END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	1.999 INCHES MINIMUM EITHER END,NINTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.001 INCHES MAXIMUM EITHER END,FOURTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.5588 INCHES MINIMUM EITHER END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.5594 INCHES MAXIMUM EITHER END,SECOND PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.625 INCHES NOMINAL EITHER END,SIXTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.651 INCHES MINIMUM EITHER END,SEVENTH PORTION
CFFY	STRAIGHT UNTHREADED SECTION DIAMETER	2.656 INCHES MAXIMUM EITHER END,SEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.3130 INCHES NOMINAL EITHER END,SECOND PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.3130 INCHES NOMINAL EITHER END,SEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.4940 INCHES MINIMUM EITHER END,ELEVENTH PORTION
CFFZ	UNTHREADED SECTION KEYWAY WIDTH	0.4960 INCHES MAXIMUM EITHER END,ELEVENTH PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.125 INCHES NOMINAL EITHER END,SECOND PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.125 INCHES NOMINAL EITHER END,SEVENTH PORTION
CFGB	UNTHREADED SECTION KEYWAY DEPTH	0.265 INCHES NOMINAL EITHER END,ELEVENTH PORTION
CFQQ	SHAFT SECTION SIZE	1.922 INCHESOVERALL DIA EITHER END
CFQR	CIRCULAR PORTION RADIUS	1.688 INCHES NOMINAL EITHER END,FIFTH PORTION
MATT	MATERIAL	STEEL COMP 4620
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7493,COM4620 MIL SPEC SINGLE MATERIAL RESPONSE
ZZZV	FSC APPLICATION DATA	STEAM TURBINE