INSTANT RFQ

Request a Quote on Electric Boat Corporation Part H645-5509 with the NSN 4720-01-513-5384

Part Number: H645-5509
Alternate P/N: H6455509
NIIN: 015135384
CAGE Code: 96169
FSG: 47 Pipe Tubing Hose and Fittings
Country : USA
NCB Code : 01

Thank you for taking interest in Electric Boat Corporation part number H645-5509, which is listed with the NSN 4720-01-513-5384 and a product description of “Hose Assembly Nonmetallic.” In order to receive procurement options on this particular listing, we ask that you fill out and submit the form provided below with as much information as you can concerning your needs. By supplying our staff with key details on your desired quantity, pricing target, and expedited fulfillment timeframe, we can respond with a quote that has been specifically tailored to your unique specifications. We also ask that you make us aware of any restrictions that you may have as soon as possible, such as if you have a time constraint or are seeking unlisted items.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

Alongside part number H645-5509, you are encouraged to continue exploring our collection curated catalogs to find additional items that can accompany this Hose Assembly Nonmetallic part with the NSN 4720-01-513-5384. For example, you can browse other Electric Boat Corporation components that were produced under CAGE Code 96169 or listings that belong to FSC 4720 Hose and Tubing Flexible with ease on our website, with search tools provided for quick location. Furthermore, our staff is just a call or email away from assisting you with any inquiries or requests, so be sure to get started on the quotation process for part number H645-5509 and other desired offerings on Aerospace Spare.

NSN Information for Part Number H645-5509 with NSN 4720-01-513-5384, 4720015135384

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-513-5384

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

4720015135384WN
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
2633-225-01 ASSY 77523

Characteristics Data of NSN 4720-01-513-5384, 4720015135384

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AARXINSIDE DIAMETER6.073 INCHES NOMINAL
ABJHTEMP RATING-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER6.834 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS42.000 INCHES
AECSBOLT HOLE QUANTITY12 1ST END
AEPRFLANGE OUTSIDE DIAMETER9.410 INCHES NOMINAL 1ST END
AGAVEND ITEM IDENTIFICATIONMISC PARTS LIST FOR AC-CW, PIPING PUMP DISCHARGE TO BANK ENGINE ROOM, VIRGINIA CLASS SSN
AHNCCONNECTION STYLERAISED SWIVEL 1ST END
AJEDRAISED FACE HEIGHT0.015 INCHES NOMINAL 1ST END
AJEERAISED FACE DIAMETER7.370 INCHES NOMINAL 1ST END
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END
AKUTEND FLANGE CONSTRUCTIONSPLIT 1ST END
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END
AWLSCONNECTION TYPERAISED FACE FLANGE 1ST END
CMLPTHREAD QUANTITY PER INCH14 1ST END
CQBDBURST TEST PRESSURE1200.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER SPIRALLY WRAPPED FABRIC AND OUTER LAYER RUBBER COMPOSITION
CQGMMAXIMUM OPERATING PRESSURE300.0 POUNDS PER SQUARE INCH
CRXXMEASURING METHOD AND LENGTH33.000 INCHES NOMINAL EXCLUDING END FITTINGS
CTCJFLANGE STYLEROUND W/ BOLT HOLES 1ST END
CTCJFLANGE STYLEROUND W/ OUT BOLT HOLES 2ND END
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYHOSE ASSY, STRAIGHT, FLG
FEATSPECIAL FEATURESASSY INCLUDES: 1 HOSE, SYN RUBBER, 6.000 IN I.D. X 6.880 IN, 300 PSI, 33.000 IN LONG, LOW PRESSURE (P/N F243-1), 2 ELBOWS, 90 DEG, HOSE X FLG -96 HOSE X 6.000 NPS (P/N F243-2), 1 TAG ASSY, HOSE, 4.000 TO 8.000 IN DIA PER 96169/2633-225-01,
MEDAMEDIA FOR WHICH DESIGNEDWATER, SALT SINGLE RESPONSE
THSDTHREAD SERIES DESIGNATORNPS 1ST END
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-H-24136/1 GOVERNMENT SPECIFICATION
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AARXINSIDE DIAMETER6.073 INCHES NOMINAL
ABJHTEMP RATING-40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER6.834 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS42.000 INCHES
AECSBOLT HOLE QUANTITY12 1ST END
AEPRFLANGE OUTSIDE DIAMETER9.410 INCHES NOMINAL 1ST END
AGAVEND ITEM IDENTIFICATIONMISC PARTS LIST FOR AC-CW, PIPING PUMP DISCHARGE TO BANK ENGINE ROOM, VIRGINIA CLASS SSN
AHNCCONNECTION STYLERAISED SWIVEL 1ST END
AJEDRAISED FACE HEIGHT0.015 INCHES NOMINAL 1ST END
AJEERAISED FACE DIAMETER7.370 INCHES NOMINAL 1ST END
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END
AKUTEND FLANGE CONSTRUCTIONSPLIT 1ST END
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END
AWLSCONNECTION TYPERAISED FACE FLANGE 1ST END
CMLPTHREAD QUANTITY PER INCH14 1ST END
CQBDBURST TEST PRESSURE1200.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER SPIRALLY WRAPPED FABRIC AND OUTER LAYER RUBBER COMPOSITION
CQGMMAXIMUM OPERATING PRESSURE300.0 POUNDS PER SQUARE INCH
CRXXMEASURING METHOD AND LENGTH33.000 INCHES NOMINAL EXCLUDING END FITTINGS
CTCJFLANGE STYLEROUND W/ BOLT HOLES 1ST END
CTCJFLANGE STYLEROUND W/ OUT BOLT HOLES 2ND END
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYHOSE ASSY, STRAIGHT, FLG
FEATSPECIAL FEATURESASSY INCLUDES: 1 HOSE, SYN RUBBER, 6.000 IN I.D. X 6.880 IN, 300 PSI, 33.000 IN LONG, LOW PRESSURE (P/N F243-1), 2 ELBOWS, 90 DEG, HOSE X FLG -96 HOSE X 6.000 NPS (P/N F243-2), 1 TAG ASSY, HOSE, 4.000 TO 8.000 IN DIA PER 96169/2633-225-01,
MEDAMEDIA FOR WHICH DESIGNEDWATER, SALT SINGLE RESPONSE
THSDTHREAD SERIES DESIGNATORNPS 1ST END
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-H-24136/1 GOVERNMENT SPECIFICATION

Related NSN Components of H645 5509

Part H645-5509 With Different Manufacturers

Recently Viewed Parts

A3250089-1000F

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certification
  • ESD S20.20-2014 Certification

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top